HM-4K2P

WOLKIS Monitored Home

This apartment has been monitored since 5 May 2026. The record covers 84.5% of the hours since then — every interruption is listed further down, none of them averaged away. The readings behind that statement are shown below.

This is not a certificate and not an inspection verdict. It is a statement of fact: what is measured, since when, and whether conditions stayed within the thresholds Dubai Municipality publishes for indoor environments. No address, no names, no personal data.
Monitored since
5 May 2026
110 days
Readings recorded
13,230
13,230 hash-chained
Hours with data
84.5%
2,251 of 2,663 hours
Episodes above a limit
3
each one dated in the table below

What is measured

Air temperature, relative humidity, carbon dioxide, PM2.5 and PM10 — sampled continuously by battery-powered wireless indoor monitors, with no client Wi-Fi and no camera or microphone in the apartment.

ParameterAveraging windowLimitHighest observedResult
CO₂8-hour average800 ppm568.9 ppmwithin limit
PM2.524-hour average35 µg/m³44.6 µg/m³3 episodes · 58 h above
PM2.51-hour average100 µg/m³67.0 µg/m³within limit
PM1024-hour average150 µg/m³52.5 µg/m³within limit
PM108-hour average100 µg/m³64.1 µg/m³within limit

An episode is a continuous stretch during which the rolling average stayed above the limit. Rolling windows overlap, so we count episodes and the hours they cover rather than the number of windows — the latter would inflate a single long stretch into dozens of separate-looking events.

Thermal comfort

ParameterComfort rangeObserved rangeHours inside range
Air temperature22.5–25.5 °C 22.6–26.1 °C (mean 24.1) 99.9% · 1 h outside
Relative humidity20–60% 33.5–59.2% (mean 45.5) 100%

Gaps in the record

A monitoring record is only worth what its gaps admit. This installation lost 412 hours across 9 interruptions, the longest of them in summer. We publish the gaps rather than average them away: on a client installation a loss of signal raises an alert, and the reason for each interruption is recorded in that home's service log.

Last reading beforeFirst reading afterGap
2026-06-20 21:002026-07-02 17:00283 h
2026-05-19 12:002026-05-21 13:0048 h
2026-05-28 19:002026-05-29 15:0019 h
2026-07-02 17:002026-07-03 13:0019 h
2026-07-03 13:002026-07-04 05:0015 h

What this page can and cannot tell you

It can

  • Show that monitoring has run continuously since a stated date
  • Show the thresholds applied and every period that went above them
  • Show how much of the period is actually covered by data
  • Give a buyer or tenant a dated record instead of a verbal assurance

It cannot

  • Certify the building — we are not an accredited inspection body
  • Replace a laboratory analysis of water, mould or microbiology
  • Speak for rooms or systems where no sensor is installed
  • Predict conditions after the last reading shown above
Integrity of the record. Every reading is written once and chained to the previous one by hash, so a row cannot be edited or removed after the fact without breaking the chain: 13,230 of 13,230 rows carry that chain. Thresholds follow Dubai Municipality guideline DM-HSD-GU119 V4 (11 December 2024) — Table 2 for common air pollutants in existing buildings, Table 3 for thermal comfort.
About this particular page. It is our own reference installation in Dubai, published as a working example of what a monitored home receives. A client page shows the same structure for their apartment, identified only by a code they control.

Questions

What does this page prove?

That an apartment has been continuously monitored since a stated date, and that the readings behind that statement are available. It is a record of measurement, not a verdict on the property.

Does a WOLKIS Monitored Home page mean the apartment is certified?

No. We do not certify buildings and we are not an accredited inspection body. Certification is issued by accredited bodies; what we publish is the measurement record we are responsible for.

Whose data is shown here?

This particular page is our own reference installation in Dubai, published as a working example. A client page carries no address, no names and no personal data — the apartment is identified only by a code the owner controls, and sharing the link is the owner's decision.

Why does the page show periods above a limit instead of hiding them?

Because a record that never shows an exceedance is a record you should distrust. Short episodes above a limit are normal in occupied homes; what matters is that they are visible, dated and bounded.

Which thresholds are used?

Dubai Municipality guideline DM-HSD-GU119 V4 (11 December 2024): Table 2 for common air pollutants in existing buildings, Table 3 for thermal comfort.

This page exists because someone put monitors in a home. If you want the same record for a flat you own or rent — what is measured, since when, and every period that went outside the limits — the monitors go in without drilling or client Wi-Fi, and the page updates itself. The link stays yours: share it with a buyer, a tenant, or no one. See how it works.